A fixed horn cleat is simple and strong, but it's also the thing everyone trips over. Hideaway cleats solve that. There are three main kinds, and the right one depends mostly on what's under the surface you're mounting to.
Flip-up (folding) cleats
A cleat on a hinge, mounted on a flat base plate. Flip it up to tie off; fold it flat when you're done. Because it bolts on top of the surface, there's no cut-out to make, just bolt holes.
Best for: docks, especially retrofits on existing decking. Trade-offs: it still sits a little proud of the surface when folded, and the hinge is a moving part that can collect grit.
- Dock Edge Flip-Up Dock Cleat 8in Polished8" · ~1/2" line · Almag 35 aluminum
- Dock Edge Flip-Up Dock Cleat 8in Black8" · ~1/2" line · Almag 35 aluminum
- Dock Edge Flip-Up Dock Cleat 8in White8" · ~1/2" line · Almag 35 aluminum
- Accon Marine Surface Mount Folding Cleat 3-1/2in3-1/2" · 3/8" line · 316 stainless steel
- Attwood Fold-Down Dock Cleat 8in8" · ~1/2" line · Aluminum
- Gen3 Marine Stainless Folding Dock Cleat 8in8" · ~1/2" line · Steel
Pull-up cleats
The cleat sits flush in a recess and you pull it up to use it. Some need a rectangular cut-out with a housing underneath; others only need two holes drilled with a hole saw. Either way, you need access to the underside to install it.
Best for: boat gunwales and decks where a perfectly flush look matters. Trade-offs: more installation work, and water can collect in the recess unless the cleat has a drain or a waterproofing cup.
- Accon Marine 460 Pull-Up Cleat 4-1/2in4-1/2" · 1/2" line · 316 stainless steel
- Accon Marine 460 Pull-Up Cleat 6in6" · 3/4" line · 316 stainless steel
- Accon Marine 490 Pull-Up Cleat 6in6" · 5/8" line · 316 stainless steel
- Accon Marine 460 Pull-Up Cleat 8in8" · 1" line · 316 stainless steel
- Accon Marine 490 Pull-Up Cleat 8in8" · 3/4" line · 316 stainless steel
- Accon Marine 460 Pull-Up Cleat 10in10" · 1" line · 316 stainless steel
Pop-up cleats
Similar to a pull-up, but spring-assisted: press it and it pops up. It sits flush when stowed and usually installs into a cut-out with a backing plate that doubles as the template.
Best for: boat decks where you want flush cleats you can deploy one-handed. Trade-offs: a cut-out in the deck, and more parts than a plain cleat.
- Accon Marine Pop-Up Cleat 4-1/2in4-1/2" · 1/2" line · 316 stainless steel
- Accon Marine Pop-Up Cleat 6in6" · 5/8" line · 316 stainless steel
- Accon Marine Pop-Up Cleat with Rod Holder 6in6" · 1/2" line · 316 stainless steel
- Accon Marine Pop-Up Cleat 8in8" · 3/4" line · 316 stainless steel
- Accon Marine Pop-Up Cleat 10in10" · 1" line · 316 stainless steel
How to choose
| Flip-up | Pull-up | Pop-up | |
|---|---|---|---|
| Cut-out needed | No | Often | Yes |
| Flush when stowed | Nearly | Yes | Yes |
| Underside access | For bolts | Yes | Yes |
| Typical home | Docks | Boats | Boats |
On a dock, a flip-up is almost always the easiest win. On a boat, choose between pull-up and pop-up by the cut-out each needs and whether the area under the deck stays dry.
Whichever you pick, size it to your line the same way as a fixed cleat. Hideaway cleats are often published with a maximum line size; you'll find it on each cleat's page.
Next guide: How to install a dock cleat on a wooden dock
