Guides

Dock line basics: size, length and type

The right line and the right cleat work as a pair. Get the line right first, then size the cleat to it.

Dock lines hold the boat, absorb the jerks from wakes and gusts, and pass that load to the cleats. A line that's too thin wears through or snaps; one that's too thick won't fit the cleat. Here's how to choose.

Diameter by boat length

These common rule-of-thumb sizes are a good starting point for most recreational boats:

Boat lengthLine diameterCleat length (rule of thumb)
Up to 20 ft3/8"6"
20 to 30 ft1/2"8"
30 to 40 ft5/8"10"
40 to 50 ft3/4"12"

Go up one size for heavy boats, boats with lots of windage, or exposed slips. The cleat column uses the 1 inch of cleat per 1/16 inch of line rule; check each cleat's published maximum on its page.

How long each line should be

  • Bow and stern lines: about two-thirds of the boat's length.
  • Spring lines: about the full length of the boat.
  • Tidal or fixed docks: longer, so the lines can follow the boat up and down. See tying up in tide, wind and current.

It's easy to shorten a long line with an extra turn on the cleat. You can't stretch a short one.

Nylon vs. polyester

Nylon is the standard for dock lines because it stretches. That stretch acts as a shock absorber, so a wake jerks the line instead of the cleat and the boat's hardware. Polyester stretches much less, which is great for sail control lines but harsh as a dock line. Polypropylene floats but degrades in sunlight and isn't a good dock line.

Three-strand vs. braided

Three-strand nylonStretchier, cheaper, easy to splice. Can get stiff over time.
Double-braid nylonSofter on the hands, stronger for its size, and looks tidier. Costs more and stretches a little less.

Protect the lines

  • Use chafe guards wherever a line crosses a dock edge, a piling or a chock.
  • Choose cleats with smooth, rounded horns; rough castings saw through lines.
  • Rinse salt and grit out of lines a couple of times a season and replace any that feel stiff or show broken fibers.

Dock lines in the database

Popular 1/2-inch lines, the size most 20 to 30-foot boats use:

For boats 30 to 40 feet, 5/8-inch:

See every dock line, or run the cleat finder to get the right size and lengths for your boat.

Cleats for common line sizes

For 1/2-inch line, these 8-inch and larger cleats have room for a full cleat hitch:

Next guide: Tying up in tide, wind and current